ICOM-16002

8*FE Unmanaged Industrial Ethernet Switch

Features :

Specification

ICOM-16002
SERVICE PORTS
8 * 10/100Base-T (X), adaptive RJ 45 ports, full-duplex / half-duplex adaptive working mode, support MDI / MDI-X adaptation
LED INDICATORS
Power indicator: PWR (green light), interface indicator is as follows; Copper ports: yellow light on for Link / Act, yellow light off link-off status; The yellow light is on and flashing as the port link-up status, sending and receiving data;
ETHERNET STANDARDS
IEEE 802.3: 10Base-T Ethernet; IIEEE 802.3u: 100Base-TX Ethernet; IEEE802.3x: Flow control
TRANSMISSION DISTANCE
Twisted pair: 10 BASE-T: Cat3,4,5 UTP cable (≤250 m), 100 BASE-T (X): Cat5 or later UTP cables (≤100 m)
INPUT VOLTAGE
Power < 3W, 4-Pin Phoenix terminal (DC12-52V) or DC terminal (DC12-52V)
OVER CURRENT PROTECTION
Current limit 4.0A
TRANSMISSION MODE
Store-and-forward (full-line speed)
MAC TABLE SIZE
1K
PACKET FORWARDING RATE
2.38Mbps
BACKPLANE BANDWIDTH
1.6Gbps (no blocking)
SWITCHING LATENCY
1K
HUMIDITY
5%~95% (no condensation)
IP RATING
IP40 protection grade, aluminium alloy shell
DIMENSIONS
143*77.8*30 MM
COOLING METHOD
natural cooling, fan-less
EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS
IEC (EN) 61000-4-2 (ESD): ± 8kV contact discharge, ± 12kV air discharge, IEC(EN)61000-4-3(RS) : 10V/m(80~1000MHz), IEC (EN) 61000-4-4 (EFT): network port: ± 4 kV CM / / ± 2kV DM, IEC (EN) 61000-4-5 (Surge): ± 4 kV CM / / ± 2kV DM, IEC (EN) 61000-4-6 (RF conduction): 3V (10 kHz ~ 150 kHz), 10V (150 kHz ~ 80 MHz), IEC (EN) 61000-4-16 (Common-mode conduction): 30V cont.300V,1s, IEC(EN )61000-4-8
SHOCK
IEC 60068-2-27
FREE FALL
IEC 60068-2-32
VIBRATION
IEC 60068-2-6
OPERATING TEMP
-20~+75℃
STORAGE TEMP
-40~+85℃
WARRANTY
3 years
Sales Request
Sales Request
Subscribe Acteck Newsletter
Subscribe Acteck Newsletter
Enquire Now
Enquire Now
Enquire Now
Enquire Now